6
TO INSTALL OR REMOVE THE BATTERIES
Remove the cover of the battery compartment located on the back of the mirror. Insert 3 AAA batteries
making sure to match the polarities as indicated on the device. Close the cover. Remove the batteries
from the product if you will not use it for a long time. It is recommended to always use 3 batteries of the
same type and brand.
HOW TO USE
• Turn on the appliance using the ON / OFF button on the back of the product.
• Turn on the LED lights by touching the “sensor touch” button.
• Hold down the “sensor touch” button to set the brightness of the lights.
• Touch the “sensor touch” button again to turn off the LED lights
• Turn off the mirror with the ON / OFF button on the back of the mirror.
ATTENTION: the mirror has a 5X magnification
Thanks to the suction cup on the back of the unit, it can be easily fixed on a smooth and flat surface as well as
on the bathroom mirror.
CLEANING AND MAINTENANCE
• Always switch off the appliance and clean the product using a soft, damp cloth and dry it thoroughly.
• Never immerse the product in water or other liquids.
• Do not expose the mirror to humidity to avoid compromising the internal circuit.
• Do not use abrasive solvents to clean the mirror as they could damage it.
• Do not expose the mirror to extremely hot or low temperatures, as this will shorten the life of the
device. destroy the batteries or distort certain plastic parts.
• Do not drop or bump the product.
• Do not attempt to repair and/or dismantle the product, contact the authorized after sales service in
case of malfunctions.
GB
