The iTaste SVD2.0 includes a battery level power tester
inside the Innokin iTaste SVD2.0 travel case.
To use the battery level power tester with compatible 18350,
18490, 18500 and 18650 batteries please:
1) Carefully attach the left and right power lines to the
negative (-) and positive (+) contacts of the battery.
2) The LED bar will light up according to the level of power
remaining in the battery:
1 LED - Battery should be charged.
2 LED - 25% Power
3 LED - 50% Power
4 LED - 75% Power
5 LED - 100% Power. Battery is fully charged.
Warning:
1) When not using the Innokin battery level power tester
please store the wires and contacts carefully in the travel
case pocket.
2) Do not spill liquids on the battery power level tester; it
should remain dry at all times.
3) Do not store the Innokin iTaste SVD2.0 travel case in
excessively hot or cold environments.
4) Do not continue to use the battery level power tester if it
becomes damaged.
WARRANTY INFORMATION
Innokin Technology provides a three month after sales
service warranty to all of our authorized vendors. Please
consult your Authorized Innokin Technology Vendor for more
information and terms of service.
Innokin’s warranty does not apply to products purchased
through third-party vendors. To ensure you are purchasing
authentic Innokin Technology products, and to take
advantage of our after sales service warranty, only purchase
from Authorized Innokin Technology Vendors.
EN-5
