Sleep Mode
If the SVD2.0 is not activated for 30 seconds the screen will
power off and it will enter sleep mode. Press the power
button to activate the unit.
Variable Wattage
Wattage can be adjusted from 5.0 – 20.0W in .1 watts
increments by pressing “ + ” and “ - ” button.
Lock the selected Wattage (Hold both the “ + ”and “ - ”
buttons for five seconds)
After setting your wattage you can lock the setting to prevent
accidental changes to your wattage. Press and hold both the
“ + ” and “ - ” buttons for five seconds to lock your settings.
The screen will show “
POWER LOCKED HOLD UP DOWN
”
and current setting parameter of wattage ,Press and hold the
“ + ” and “ - ” button for five seconds a second time to unlock.
Please note that all other functions (such as ohm check and
battery check) are still functional while you have the wattage
settings locked.
Error NOtifications
The iTaste SVD2.0 has the following error notifications: Check
Atomizer, Short Circuit, Check The Battery, Overheat
Protection, Battery Low Voltage, Reset .
Check Atomizer
When the atomizer is not connecting properly the screen will
display : “
CHECK ATOMIZER
”
Short Circuit
The screen will display “
SHORTED
” if there is a short circuit.
Check Battery:
When the battery voltage lower than 3.1 V the screen will
display “ CHECK BATTERY ” when the firing button is pressed.
Please recharge or replace the battery. If the quality of the
battery is not sufficient for the iTaste SVD2.0 the screen will
display “
WEAK BATTERY
”.
Overheat Protection:
The screen will display “
TOO HOT
” if the PCB overheats
from overvaping.
“ ” button: ON/OFF battery switch
To power on or power off the iTaste SVD2.0 quickly push the
“ ” power button three times.
When the iTaste SVD2.0 has been powered on hold the
button down to activate the unit and commence vaping. This
safety feature prevents the atomizer from powering on
unintentionally.
ON Mode
Quickly press the “ ” button three times to power on your
iTaste SVD2.0; the screen will display the current Watts
setting and the resistance (Ohm) of the attached atomizer.
OFF Mode
Quickly press the “ ” button three times to power off your
iTaste SVD2.0, the screen will display “
LOCKED CLICK 3X
”.
OPERATION GUIDE
EN-3
EN-4
1. Connector
2. Firing , ON/OFF button
3. Wattage increase button
4. Wattage decrease button
Please note:
Pressing Buttons 3 (+) + 4 (-) together for
5 seconds will activate or deactivate the Wattage Lock
function.
5. Thread adaptor Cap
6. 18350 battery tube
7. 18650 battery tube
8. Battery cap
1
3
2
4
5
7
8
6
