Innohome Stove Guard SGK500, Руководство пользователя

Страница: 8 / 24

5
STOVE GUARD SGK500 USER MANUAL
1.4 Meaning of alarm signals
The Intelligent Heat Sensor signal has a higher tone than the Control Unit signal. The
Intelligent Heat Sensor is attached above the cooker, the Control Unit signal sounds
from behind the cooker.
1. Innohome Stove Guard and how to use it (cont.)
Sound Meaning Course of Action
I n t e l l i g e n t H e a t
Sensor: a short ‘beep’
every few seconds The Intelligent Heat Sensor has identified
a high temperature or a steep tempera-
ture rise above the cooker (Overheating
Monitor). This is the Intelligent Heat
Sensor pre-alarm signal, that is emitted
one minute before the cooker is turned
off. Reset the pre-alarm signal if it was
triggered by a normal cooking situation
– this will cause the Intelligent Heat Sen-
sor to reduce its sensitivity automatically
and will prevent the cooker shutdown. Press the Intelligent Heat Sensor
cover once during the pre-alarm
signal.
Intelligent Heat Sen-
sor: repetitive fast
‘beep, beep, beep’ The Intelligent Heat Sensor has identified
a high temperature or a steep tempera-
ture rise above the cooker (Overheating
Monitor alarm) – the cooker has been
turned off. First turn all cooker knobs to ‘0’,
then press the Intelligent Heat
Sensor cover once. In cookers that
are operated by touch just press
the Intelligent Heat Sensor cover
once.
Control Unit: a short
‘beep’ every few sec-
onds This is the Control Unit pre-alarm signal,
that sounds for one minute before the
Intelligent Timer turns the cooker off. By
pressing the Intelligent Heat Sensor cov-
er once during the pre-alarm signal, the
cooker shutdown can be prevented. Press the Intelligent Heat Sensor
cover once during the pre-alarm
signal.
Control Unit: a short
signal at approx-
imately 5 second
intervals The cooker has been turned off due to
the Intelligent Timer function, detect-
ing an alarm signal of an external (fire,
carbon monoxide or gas) alarm, or the
Overheating Monitor detecting a dan-
gerously high temperature or a steep
temperature rise. First turn all cooker knobs to ‘0’,
then press the Intelligent Heat
Sensor cover once. In cookers that
are operated by touch just press
the Intelligent Heat Sensor cover
once.