Innofit FIT-806, Инструкция по эксплуатации

Страница: 22 / 28

22
GB
working properly (or press SPEED on the right side of the handlebar). Press and hold the
SPEED button for more than 2 seconds to increase / decrease the speed continuously.
The maximum speed is 12km/h and the maximum time displayed is 99.59 minutes.
4. Press STOP button or remove the safety key to stop the treadmill
5. Press MODE in standby mode to select one of the 3 parameters: TIME / DISTANCE /
CALORIES (which will begin to flash in each window), press SPEED or to set a target
value for one of the parameters and press START to set. Reached the target value, the
display will show speed 1.0 and the system will emit a “Bi” sound alarm, the speed will be
reduced to 1.0.
6. In STAND BY mode, press the PROGRAM button to select one of the 12 programs.
P1: (white) is the manual program, press SPEED to set the duration, then press START to
start running.
P2-P12 are pre-set programs, P2/3/4 (orange) are suitable for children over the age of
12 years, P5/6/7 (green) are suitable for adults who lead a sedentary life and for elderly,
P11/12 are suitable for athletes
P1: working with a speed of 1 km / h, press SPEED to change the speed, TIME / DISTANCE
/ CALORIES start at zero and gradually display the values achieved.
P2: the display window DISTANCE display KM 1.5, the pre-set time is 12:00 minutes, the
display shows how speed 7.5 km/h. Press SPEED to increase the speed, when the
system will sound the alarm “Bi”, the speed will always return to 7.5 km / h
P3: the display window DISTANCE display 3KM, the pre-set time is 26:00 minutes, the
display will show how speed 7.0 km/h. Press SPEED to increase the speed, when the
system will sound the alarm “Bi”, the speed will always return to 7.0 km/h
P4: the display window DISTANCE display 5KM, the pre-set time is 50:00 minutes, the
display will show how speed 6.0 km/h. Press SPEED to increase the speed, when the
system will sound the alarm “Bi”, the speed will always return to 6.0 km/h
P5: the display window DISTANCE display 1KM, the pre-set time is 7:00 minutes, the
display will show how speed 8.6 km/h. Press SPEED to increase the speed, when the
system will sound the alarm “Bi”, the speed will always return to 8.6 km/h
P6: the display window DISTANCE display 1KM, the pre-set time is 9:00 minutes, the
display will show how speed 4.2 km/h. Press SPEED to increase the speed, when the
system will sound the alarm “Bi”, the speed will always return to 4.2 km/h
P7-12: Selecting one of these programs, the window on the display relative to the time
TIME will flash and the display shows 30:00, press SPEED to set the duration in the range
from 5:00 to 99:59 , press START to start the program. Each program consists of 20
intervals, each interval is one-twentieth of the total exercise duration and is characterized
by a predetermined speed. If during the interval the speed is changed, this will be re-set
in the next interval to the speed provided for that range.