16
GB
-
AUTO- SCAN:
automatically moves from one function to another every 4 seconds
showing the values.
-
ODOMETER:
shows the total distance 0.1-999km.
-
PULSES:
shows the heart rate: 40-206 BPM (beat per minute).
Press MODE button until appears at PULSE position. Place the palm of your hands on
both the contact pads. After 6-7 seconds, the computer will show the current value of
your heart rate in BPM (beat per minute).
• Avoid to move the hands, when you use the heart rate monitor. An excessive movement
may affect the reading of the heart rate.
• Do not grip the metallic pads too tightly, you might interfere with the correct measuring
of the heart rate.
• In order to get a more accurate measurement, touch the contacts at least for 10 seconds.
• For a better performance of sensors, please keep the metallic pads clean. Please clean
the contact with a soft cloth and do not use alcohol or other abrasive chemical
substances.
WARNING:
The pulse sensors supplied are not medical devices. Various factors, including
the movement, may affect the accuracy of heart rate. These sensors to detect pulsations
are intended only as an aid in determining heart rate trends during training.
Never use the
values obtained by this device to determine a medical treatment.
BUTTON:
MODE/RESET button: press to select the desired function. An arrow on display shall point
out the function in use. Press and hold the button 3 seconds to reset all the values.
BATTERIES:
This computer operates with 2 AAA batteries.
Remarks:
remove the batteries in case of prolonged no- use. When replacing the batteries,
use 2 batteries of the same type and brand.
RATING LABEL
FIT-802
3V 2x1,5 AAA batt.
Rev. 00_12.2012
MADE IN CHINA
LOT n.
