11
PRODUCT DESCRIPTION
GB
Eye treatment head (MODE A)
LED indicator
Facial treatment head (MODE B)
MODE/OFF switch
Ion sensor
Battery compartment
BATTERY INSTALLATION
Remove the cover of battery compartment. Insert two new AAA batteries accor-
ding the polarities shown on the battery compartement and then close the cover.
It is recommended to remove the batteries from the device if not used for a long
time.
INSTRUCTION FOR USE
Remove the cover of battery compartment, insert two new AAA batteries accor-
ding the polarities shown on the battery compartement and then close the cover.
Mode select:
MODE A) Eye care - push the button upwards , the LED indicator turns on in gre-
en. Thoroughly clean the eye-contour area, then apply eye cream along the lenght
of the wrinkles. Hold the device in one clean, bare hand , making sure the ion sen-
sors on both sides have good contact with the skin of the bare hand.
While looking in a mirror, lightly contact the eye treatment head to one end of the
surface of the wrinkle to be treated. Slowly move the device along the full lenght
of the wrinkle surface from inner to outer, applying light pressure and maintain
constant contact with the skin. Focuse on one point al least 5 seconds. At least 4
passes over the wrinkle should be made. The distance between two adjacent points
is suggested to be one millimeter.
MODE B) Facial care - push the button downwards , the LED indicator turns on
in green. Clean the face before use, apply water-based skin care products or mask
