Innodisk SATADOM-SH 3SE Series, Руководство пользователя

Страница: 11 / 20

SATADOM-SH 3SE
11 Rev 1.3 TPS, Jan., 2015
2.10 Mechanical Dimensions
2.11 Assembly Weight
An Innodisk SATADOM-SH 3SE within flash ICs, 32GB’s weight is 7 grams approximately.
2.12 Seek Time
Innodisk SATADOM-SH 3SE is not a magnetic rotating design. There is no seek or rotational
latency required.
2.13 Hot Plug
The SSD support hot plug function and can be removed or plugged-in during operation. User has
to avoid hot plugging the SSD which is configured as boot device and installed operation system.
Surprise hot plug : The insertion of a SATA device into a backplane (combine signal and power)
that has power present. The device powers up and initiates an OOB
sequence.
Surprise hot removal: The removal of a SATA device from a powered backplane, without first being
placed in a quiescent state.
2.14 NAND Flash Memory
Innodisk SATADOM-SH 3SE uses Single Level Cell (SLC) NAND flash memory, which is
non-volatility, high reliability and high speed memory storage. There are only two statuses 0 or 1
of one cell. Read or Write data to flash memory for SSD is control by microprocessor.