Innoband AV 200P-I1, Руководство пользователя

Страница: 7 / 32

- 7 -
Hardware Overview
HomePlug AV 200P-I1
The Description of each labeled part is described in the table below.
1.0 DET LED
Blink when detect the presence of other HomePlug 1.0
devices that have the transmission rate of 14 or 85 Mbps.
Note: Due to the incompatibility of HomePlug AV 200 with
HomePlug 1.0 devices, the presence of the HomePlug 1.0
devices within the powerline network will thus reduce the
performance of your powerline network.
Power LED
Lit when the power is on.
PLC
(Powerline Link/Act)
LED
Lit when a network has been established. Blink when
powerline data is transmitted or received.
ETH
(Ethernet Link/Act)
LED
Lit when an Ethernet data signal is transmitted or received.
Sync Button
Used to establish a LAN network with other Ethernet devices.
Reset Button
Press this button to restore the device configuration to factory
default.
Ethernet Port
Connect the HomePlug AV device with an Ethernet device
(eg. PC or modem router) with the Ethernet cable included.
Power Plug / AC Power Cord
Plug into an electric socket to draw power and to form a
powerline network with other HomePlug AV devices.
PLC LED
Power LED
1.0 DET LED
ETH LED
Sync Button
Reset Button
Power Plug
Ethernet Port