Innoband 8520-C1, Руководство пользователя

Страница: 53 / 96

8520-C1 User Manual
47
Figure 52 : Dynamic IP Routing Configuration
To enable the dynamic routing:
Select the Interface where to share and exchange the routing table. Click Edit .
Select the RIP Version as 1 , 2 or both .
Select the Operation Mode as Active, Passive, or Send Only.
Select Enabled .
Click Apply .
Scan PVC
This page provides you to scan the active PVCs from the list after rebooting device
automatically or you could edit the list and click Start to scan active PVC and stop to
cancel the scan procedure.
Figure 53 : Scan PVC Configuration
To configure SNMP:
The current status is shown in the Scan State .
Enter the desired PVC list in the Global Search List . A list of VPI/VCI pairs