9
Install your new device
Connect your Router
This chapter is to help you accessing into Internet with a quick and convenient way. If
you need more detailed information for web configuration, please get into the next
chapter for the advanced configuration.
NOTE: To configure the device via web browser, at least one properly-configured PC must
be connected to the network (either connected directly or through an external hub/switch
to the LAN port of the device).
1.
With your computer off, plug the end of the ADSL cable (gray) into the DSL port
of your ADSL WLAN Router.
2.
Connect the Ethernet cable (yellow) to the LAN port of your ADSL WLAN Router.
3.
Connect the other end of the Ethernet cable to the LAN port of your computer.
4.
Connect the power supply to your ADSL WLAN Router
5.
Plug the power plug into a power outlet.
6.
Turn your computer on and wait until your operating system (OS) is started up.
7.
Proceed with installation (Read first the introduction and continue then with the
paragraph related to your operating system).
6
3
2
1
4
5
