InMotion inM417, Руководство пользователя

Страница: 17 / 17

16
点
Power
-
Use the type of power indicated on the marking label.
点
Plugs
-
Do not remove any of the prongs of the monitor’s three-pronged power plug.
-
Disconnect the power plug from the AC outlet under following conditions:
˖
If you will not use it for an indefinite period time.
˖
When the power cord or plug is damaged or frayed.
˖
If the product does not operate normally when the operation instructions are
followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the
product to normal operation.
˖
If the product has been dropped or the cabinet has been damaged.
˖
If the product exhibits a distinct change in performance, indicate a need for
service.
点
Power and extension cords
-
Do not allow anything to rest on the power cord.
-
Do not locate this product where persons will walk on her cord.
-
Use the proper power cord with correct attachment plug type. If the power
source is 120 V AC, use a power cord that has UL and C-UL approvals. If the
power source is a 240 V AC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the respective European
country’s safety regulations, such as VDE for Germany.
-
Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 10 amperes.
-
Ensure that the total ampere rating of all units plugged into the extension cord is
not over the cord’s rating.
-
If the power supply cord, which came with your monitor, is to be connected to
the PC instead of the wall outlet, this equipment is to be used with UL/TUV
approved computers with receptacle rated 100~240V AC, 50/60Hz,
4.0A(minimum).
点
Environment
-
Place the monitor on a flat and leveled surface.
-
Place the monitor in a well-ventilated place.
-
Keep the monitor away from:
Extremely hot, cold or humid places, places directly under sunlight, dusty surroundings,
equipment that generate strong magnetic fields.