Inmarsat Regional BGAN, Руководство пользователя, Страница: 16 / 58

S
TEP
3: C
ONNECTING THE
S
ATELLITE
IP M
ODEM TO YOUR
PC
1. Place Satellite IP Modem outside on a flat surface
with a clear view of the sky.
2. Power up Satellite IP Modem by pressing the
Power button.
3. Choose one of the following options to connect
your PC to the Satellite IP Modem:
ƒ USB
ƒ Ethernet
ƒ Bluetooth
IMPORTANT: You must disconnect any existing
LAN connections on your PC before proceeding with
installation. You must verify that the proxy server
settings in your browser are disabled. For Microsoft
Internet Explorer, select Tools / Internet Options / Connections / LAN Settings and
uncheck the box labelled 'Use a proxy server for your LAN'. For Netscape, go to
Advanced Preferences and select 'Direct connection to the Internet'. When complete
please close your browser. DO NOT FORGET YOU MAY NEED TO RECHECK
THIS BOX ON RETURN TO YOUR OTHER INTERNET CONNECTION.
S
TEP
4: C
ONNECTING
U
SING
USB
1. Connect the white USB cable to your computer, and
insert the other end of the connector into the
Satellite IP Modem.
2.
To check the active interface, press and hold the
SELECT button for a few seconds. If the USB light
flashes red then USB is already selected. If not, press
the SELECT button once or twice as needed to
change the selection to USB. After a short pause, t
Satellite IP Modem will restart with the USB
interface selected. If the Satellite IP Modem is under
battery power it will power down; press and hold
power button to reapply power.
he
Note:
When plugging in the USB cable for the first time, you will see Windows
installing a new driver for the device.
Regional BGAN Satellite IP Modem User Manual
7