![Inmarsat BGAN Thrane&Thrane Explorer 700 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/inmarsat/bgan-thraneandthrane-explorer-700/bgan-thraneandthrane-explorer-700_getting-started_2062049005.webp)
Getting Started with the EXPLORER 700
Page 3
3
Setting up the terminal
This section explains how to set up the EXPLORER 700 terminal and connect to the BGAN
network. The steps described are:
a. Installing BGAN LaunchPad on your computer.
b. Installing the SIM card and battery.
c. Obtaining power and charge the battery.
d. Obtaining a GPS fix.
e. Connecting the terminal to your computer. Inmarsat recommends that when first setting up you
use either:
•
the LAN interface, or
•
the USB interface.
If you use USB, you must first install the supplied drivers.
f. Pointing the terminal and register with the BGAN network.
Pre-requisites
Before you start, make sure that you have:
•
The BGAN terminal.
•
The rechargeable battery, supplied with the terminal.
•
A USIM card, supplied by your Service Provider.
•
The Ethernet cable supplied with the terminal, or the USB cable mounted with a Mini-B
connector supplied with the terminal, depending on how you want to connect the terminal to your
computer.
•
The BGAN LaunchPad installation CD, supplied with the terminal. Make sure that the PC or Mac
has the minimum system requirements for BGAN LaunchPad (refer to page 5 for details).
•
The USB drivers supplied on your installation CD, if you intend to connect to your computer
using USB.
•
An RJ11 handset or G3 fax machine if you intend to use the Phone/fax interface.
•
An RJ45 handset or ISDN data device if you intend to use the ISDN interface.
•
A Bluetooth-enabled computer, with a supported profile, if you intend to connect using Bluetooth.
•
A wireless router or wireless-enabled computer, if you intend to use a wireless connection.