Getting Started with the EXPLORER 700
Page 13
Automatic mode
The EXPLORER 700 offers the following automatic features:
By default, the terminal automatically opens a data connection after you register with the network.
However, there may be a minimum charge for opening an IP data connection (depending on your
Service Provider), and data may be transferred across the connection even if you are not actively
using an application (for example, your computer may be receiving automatic updates).
If you do not want to incur these charges, you can switch off the automatic connection feature. To
do this:
a Select
BGAN Services > LaunchPad Automatic Connection
from the BGAN LaunchPad
main menu.
b Uncheck the check box to turn off automatic data connection.
You can configure the terminal to automatically exit pointing and set up a data connection after
power on. This feature is disabled by default, but you can enable it using the EXPLORER 700
Web interface. Refer to the “EXPLORER 700 User Manual” for details.
