2
DAT104 Operation Manual - V1.0 12/1/00
© 2000 - INLINE, Inc.
Compatibility
INPUT
The DAT104 will accept a single link TMDS signals with at resolutions up to 1280 x 1024
(SXGA). The unit accepts the signal on a 20-pin DFP connector. The DAT104 will also accept
single link TMDS based signals from DVI ports when used with the appropriate video adapter
cable (see the list on page 6).
OUTPUT
Featuring four (4) independently buffered DFP (MDR20) video output ports, the DAT104 can
drive up to four display devices simultaneously. The output signals are compatible with flat panel
displays, plasma monitors, LCD projectors and other display devices that accept digital video
signals.
Due to the nature of TMDS signaling, all display devices connected
to the DAT104 must have the same native resolution. Output 1
provides an EDID data link between the local display device and the
computer’s video graphics card. The computer graphics card senses
the native or optimal resolution of the data display connected to Output
1 and configures the video signal to the ideal resolution for that
display. If the displays connected to Outputs 2, 3 and 4 on the
DAT104 have a different native resolution than the display connected
to Output 1, they will not operate properly.
