www.inline-info.com Page 4 of 7
6. Improper use
Unauthorized use in the sense of a foreseeable misuse applies as follows:
•
Do not disassemble the receiver, repairs need to handle by qualified service
personnel.
•
Do not expose the receiver to excessive heat or direct sunlight.
•
Avoid moisture
•
Do not expose the receiver to violent vibrations.
7. Radio frequency reference
General allocation of frequencies for use in local area networks, wireless
local area networks (WLAN applications)
Pursuant to § 55 of the Telecommunications Law (TKG) hereby frequencies
are allocated in the range from 2400.0 to 2483.5 MHz for the use by the
general public in local networks and wireless local networks.
This general assignment comes with the mandatory implementation of the
European commission to harmonize used frequency spectrum by short-range
devices from November 9
th
2006 (2006/771/EG), as last amended by the
implementing decision of commission on December 8
th
2011 (2011/829/EU),
published in the official journal of the European Union L 329, page 10 et seq.
on December 13
th
2011 in Germany.
If you plan to use the product outside Germany please inform yourself
previously about the legal regulations of each country.
8. Use
Pairing the Bluetooth receiver:
The following instructions will help you connect the InLine® Bluetooth True Hi-
Fi audio receiver to your music system and connect it to your tablet, computer,
or smartphone.
Step 1:
Connect the audio cable (RCA or Toslink) from the rear of the receiver to the
audio input of the music system.
Step 2:
Connect a USB power supply to the micro-USB socket of the receiver and
then connect it to the power outlet. The receiver automatically enters the
pairing mode, which is indicated by a flashing LED display.
Step 3:
Turn on the Bluetooth function in your playback device (Smartphone) and go
to the Bluetooth settings.
Step 4:
Scan for new Bluetooth devices, the receiver is displayed as "InLine BT Hi-Fi
Receiver". After successful connection, this is indicated by a permanent LED
on the receiver.
Step 5:
Make sure your HiFi audio system is turned on and the correct input source is