www.inline-info.com
GENERAL INFORMATION
VALIDITY:
These operating instructions apply to the following
product:
41360I
InLine® USB Fingerprint Scanner,
Windows Hello compatible
MANUFACTURER:
INTOS ELECTRONIC AG
Siemensstraße 11
D-35394 Gießen
DATE:
April 2019
INTENDED USE
The InLine® USB Fingerprint Scanner is used to log in
a Windows computer and enables the unlocking of PCs
and notebooks with Windows operating system via fin-
gerprint. The user identifies himself by placing fingers
on the read head. The computer recognizes the authori-
zed user and gives access to the computer.
GENERAL WARNINGS
•
Read this manual before using the USB Fingerprint
Scanner.
•
Protect from dust, moisture, and extreme temperatures.
•
Always keep the surface of the sensor clean to obtain
an adequate scan result.
IMPROPER USE
The following shall be regarded as improper use in the
sense of a foreseeable misuse:
•
Do not open the device, avoid shocks, scratches or
other damage to the device.
INTRODUCTION
The InLine® USB Fingerprint Scanner is used to log in
a Windows computer and enables the unlocking of PCs
and notebooks with Windows operating system via fin-
gerprint. The Hello logon function of the Windows ope-
rating system is used for this purpose.
SETUP
Plug the InLine® USB Fingerprint Scanner into a free
USB 2.0 port on your computer. The hardware will be
installed automatically, no driver is required.
After successful installation the entry „ELAN Smart-id
Fingerprint“ appears in the category „Biometric de-
vices“ in the device manager.
The InLine® USB fingerprint scanner is now ready to
be configured for Windows Hello. To do this, navigate in
the Windows settings under „Accounts“ to the submenu
„Login options“. There you follow the setup wizard for
Windows Hello.
After successful setup, the InLine® USB Fingerprint
Scanner can be used to log in to Windows or to unlock.
FEATURES AND SPECIFICATIONS
•
USB Version: USB 2.0
•
Color: black and silver
•
Sensor: 4 x 10 mm
•
Fingerprint profiles: max. 10 storable
•
Recognition time (fingerprint): 0.15 seconds
•
System requirements: Windows 10
•
Operating conditions: 0 to +70 ºC, 5 - 90 % relative hu-
midity (non-condensing)
•
Storage conditions: 0 to +80 ºC, 5 - 90 % relative humi-
dity (non-condensing)
•
Dimensions (WxHxD): 20 x 16.5 x 8 mm
•
Weight: approx. 3g
USB
FINGERPRINT
SCANNER
INSTRUCTION MANUAL
