Lighitng & Spacing
1
2
3
4
5
6
Dimming Control
Troubleshooting
2. Faulty Switch.
3. Faulty wire connection.
2. Replace switch.
3. Check wiring.
4. Damaged or defect LED driver.
4. Replace the LED driver
Fixture doesn't light.
Problem
Possible Cause
1. Power is off.
1. Check if power supply is on.
Corrective Action
Fuse blows or circuit breaker trips when light is turned on.
1. Overloaded circuit
2. Short circuit.
Discontinue use and call customer service.
E
Connect the LED puck lights and connection box
-
-
3
Press the on/off button to switch on the light and use the dim/bright button to adjust the brightness of the puck lights.
Bright Button
Dim Button
On & Off Button
Dimmer Control Unit
Installation (Section B) - Surface Mounting (Wires on top of a shelf or cabinet)
- Install the connection box and dimmer control unit as described in
step 5 to 6 of Section A - Surface Mounting (Wires under a shelf or
cabinet).
- Connect and secure the cords, then connect the plug to the
electrical outlet as described in steps 7 to 9 of Section A - Surface
Mounting (Wires under a shelf or cabinet)
