3
SAFETY INSTRUCTIONS
Always wear proper apparel.
Do not
wear any loose clothing, gloves, neckties
or jewelry that can get caught in the
machine’s moving parts. Secure long hair
with a rubber band or hair tie.
Keep work area well lit and clean.
Make sure your work area is not cluttered.
Do not operate unattended.
Adult
supervision is required at all times. Never
leave the machine running unattended.
Do not operate this machine while
under the influence of drugs, alcohol
or any medication.
Never run diamond band saw blades
dry.
Diamond band saw blades are
designed to be used with a lubricant,
such as water, and will be ruined
immediately if used dry. Always make
sure you are using adequate water while
sawing so that the material’s dust doesn’t
form. This dust contains chemicals that
can be hazardous to your lungs if inhaled
and is known to cause cancer, birth
defects or other reproductive harm. To
reduce your exposure to these chemicals,
work in a well ventilated area and wear a
face or dust mask.
Never cut more than one workpiece at
a time.
Some materials contain poisonous
elements.
Avoid sawing materials that
contain uranium, mercury, lead, arsenic,
etc. Make sure you know the material you
are sawing.
Allow your band saw to cool.
By
ignoring this warning, the DB-100 can
overheat and deform the saw housing.
We recommend cutting on the DB-100 for
30 minutes on, then allow 30 minutes off
so the machine can cool down.
Do not force the tool or attachment
to
do a job it is not designed to do.
Avoid awkward operations and hand
positions.
Make sure you have good
balance while working on this machine.
A sudden slip could cause your hand to
move into the blade.
Always stay alert.
You must be focused
while working on this machine. Your
sawing material can catch on the saw
blade and eject out of the sawing area.
Maintenance
Always disconnect from power
before servicing.
Disconnect machine
from power source before making any
adjustments and when not in use.
Do not abuse the power cord.
Never
carry the machine by the cord or yank it
to disconnect from receptacle. Keep cord
away from heat, oil and sharp edges.
Do not open the motor housing.
There
are no user serviceable parts inside.
Clean and dry machine after use.
Содержание DB-100
Страница 1: ...INSTRUCTION MANUAL DB 100 band saw ...