Inkcups ICN-B100, Руководство пользователя

Страница: 20 / 46

INKCUPS PAD PRINTERS ICN-B100
¤
All rights reserved by Inkcups Now Corporation Page 19
V:91719
TWO INK TWO PRINT
TWO INK TWO PRINT
TWO INK TWO PRINT
Operating Your Machine
CHOOSE YOUR DESIRED PRINTING PROGRAM
When the machine is initially turned on, you can press
START/STOP to turn the machine into ready mode. Then, the
pad will be moved out and the green READY signal light will be
flashing. This indicates that the machine is ready for work.
Under the ready mode, you can press the PROG. button to
choose your desired printing program. Program
0 is the basic
single color printing function. Although there are other programs from 1 to B, we
have disabled these programs because they are not applicable to this model. The chosen
program will be shown on the indicator next to it. Then, press START/STOP again to start
printing and you will see that the
READY signal light will be always ON during the work.
If you want to change the current printing program or any other settings when the machine is
running, please stop the machine first by pressing START/STOP again. When the green
READY signal light is flashing, you can change the settings.
SET THE FREQUENCY OF INK PICK UP AND PRINTING
In order to suit for your different printing needs, you can set the
printing pad to pick up ink and print once or twice. If you want to
set this, make sure that the pad is ON by checking if the
PAD
ON/OFF signal light is on or off. If it is off, you can press the
PAD ON/OFF button to make it on. Then, you can press the
FUNC key to set the frequency of ink pick up and printing. The
setting is indicated by the TWO INK and TWO PRINT signal
lights:
Î The pad will pick up ink twice but print once.
Î The pad will pick up ink once but print twice.
Î The pad will pick up ink twice and print twice.
SET TO PRINT CONTINUOUSLY OR TO PRINT IN SINGLE CYCLE
Chapter
4
Program Indicator
Ready
Signal
Light