1.
Remove the plastic rivet clips to
remove the radiator support cover.
4.
With flat head screwdriver carefully push clip
back, and remove the side indicator. Pull panel of
bumper back.
3.
Remove the screws and plastic rivet
clips on bottom of bumper using flat head
screwdriver, t30 torx, and 10mm socket.
5.
With flat head screwdriver, locate the push clip
and pull back the top of the headlight trim.
Carefull not
pull to hard.
8.
Loosen pass side intercooler
bracket using 10mm socket or wrench.
save bracket and screw for later install.
7.
Carefully raise the vehicle up and
unscrew the 2 screws on both sides of
bumper.
6.
Now pull back the bumper and remove.
10.
Now carefully pull out the intercooler
from the vehicle.
9.
Loosen the 4 bolts holding in the
Intercooler to the intercooler pipes using
12mm socket or wrench.
Instruction Manual
P/N:FM1582i
2.
Loosen the screws holidng in the
ram scoop. pull back the Ram scoop from
the intake.
11.
Now Remove the OEM gasket
from the stock intercooler on both sides.
Page 3 FM1582i
7.
Loosen driver side intercooler
bracket using 10mm socket or wrench.
save bracket and screw for later install.
Plastic Rivet clips
Bracket
Bracket
