With pliers, loosen and pull back the crank case line
from the intake tube.
With 5.5mm socket and ratchet, loosen the clamp on
the air box.
Turn the front tires all the way to the left. This will allow
for easy removal of the resonator. Push back the
splash guard also, remove any push clips holding the
splash guard.
Loosen the 2 bolts that hold in the air box using
10mm socket and extension.
Remove the velocity adaptor.
Now lift up and pull out the resonator tube.
Stock box shown in this picture.
Disconnect the 2 push clips from the splash guard
cover holding in the snorkel end of the air box located
next to the battery.
Remove the front bumper cover, using flat head
screw driver, 6mm allen key, and phillips screwdriver.
Carefully remove.
Pull back the coupler connecting the resonator tube
to the lower part of the air box.
Carefully remove the resonator from the vehicle.
Loosen the two 10mm bolts holding in the resonator.
Note: This will require some force when removing
from the vehicle, very tight fit.
Disconnect the MAF sensor and remove the fitting
from the air box.
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Page 2 of Part# SP1571
