1. Upon completion of the installation, reconnect the negative battery terminal before you
start the engine.
2. Align the entire intake system for the best possible fit. Once the intake has been properly
fitted continue
to tighten all nuts, bolts and clamps.
3. Periodically, recheck the alignment of the intake system and make sure there is proper
clearance around
and along the length of the intake. Failure to follow proper maintenance procedures
may cause
damage to the intake and will void the warranty.
4. Start the engine and listen carefully for any odd noises, rattles and/or air leaks prior to
taking it for a test
drive. If any problems arise go back and check the vacuum lines, hoses and clamps
that maybe causing
leaks or rattles and correct the problem.
5. Check the filter for excessive dirt build up. Clean or replace the filter with an original
Injen filter Congratulations! You have just completed the installation of the
best intake system sold on the market. Enjoy the added power and performance of
your new intake system.
Once the bracket has been aligned to the vibra-mount stud press the upper end
of the intake into the 3” hose on the primary intake.
Once the entire intake has been installed continue to align the intake for best
possible fit. After proper clearance has been made through out the length of the
intake continue to tighten all nuts, bolts and clamps. Periodically check the align-
ment of the intake tract in order to avoid damage to the intake system.
AIR INTAKES
CAR ACCESSORIES
