Vid1VideoServer.
3.3. System
Change the time and date Zone of the system.
The time date is used for reference time interval only
for the transmitted video images. It is not used for
evidence as the Time/Date of VerifiedAlarms is
embedded to the image.
We suggest either using your PC clock or linking to the
NTP server address shown. Make sure you have the
correct time zone entered for this purpose.
The Username and Passwords should be changed from
the default settings. These need to entered into the
VerifiedAlarms Connections and the Monitoring Station
informed.
Restart is a soft boot
Factory Default is as is said, you will loose all
information if this is selected.
IP allowed addresses can be entered here to increase
security – this will ensure that the device will only
respond to incoming transmission from the alarm
receiving centre (obtain the correct range from your
chosen ARC).
This is not normally enabled as most internal
networks use DHCP and IP addresses of the
connected devices are hidden to the ARC by the
VerifiedAlarms Network.
8
16. January 2008
