INIS Oirr MK2 Скачать руководство пользователя страница 2

Страница: 2 / 15

Inis Oirr MK2 Multifuel Boiler stove

Congratulations on the purchase of your

new Inis Oirr MK2 Boiler stove. We here

at Inis Stoves truly love building high

quality stoves for our customers. The

stove we produced for you was not just

an appliance to us. We hope that you

will see it as a focal point in your

home. When fitted and operated

correctly, you should enjoy many years,

trouble free warmth from your Inis Oirr

MK2 boiler stove. Please read the user

manual fully before operating the stove.

As a general recommendation to all home

owners, Inis Stoves highly recommend the

use of fire alarms and carbon monoxide

alarms to EN 50291 standard, in your

home to protect you and your family from

harm. In the event that an alarm sounds,

evacuate everyone from the building

immediately and do not re-enter the

building until it is deemed safe to do

so.

Stove features.

As shown, the twin doors are opened by

turning the right side handle anti-

clockwise over 90 degrees to just beyond

vertical. When the right door is opened

it pulls the left door opened as well to

aid re-fuelling the stove and being able

to open the doors with one hand only.

Although the door handles have been

designed to be operated with bare hands,

when burning at full output over

extended periods, a kitchen glove is

recommend.

To riddle the grate, use the riddling

hand tool and gently oscillate the

riddler back and forth. Using excessive

force can lead to damaging the riddling

mechanism.

Normally it is advisable to have the

doors closed at all times except when

re-fuelling, de-ashing and when igniting

the stove. If excess fuming to the room

results at any time when the doors are

opened, they should be closed

immediately.

Содержание Oirr MK2
















Результаты поиска

Содержание Oirr MK2

Отзывы:

INIS Oirr MK2, Руководство пользователя и инструкция по установке, Страница: 2 / 15

Результаты поиска

Содержание Oirr MK2

Отзывы: