User’s manual
Using the Control Panel
9
2.6
Signaling on the display
If several events of the same type occur, only the first will be shown on the display. If several alarms occur,
the first alarm will remain on the first line of the display and the most recent alarm will be shown on the
line below.
Use the
S
/
T
keys to scroll the events on the display.
2.6.1
Alarm signaling
Example of first alarm: a detector belonging to zone 02 goes into alarm status
1st line: number of the first zone to go into alarm status
2nd line: description of the first zone to go into alarm status
3rd line: -
4th line: total numbers of alarm events and total number of zones in
alarm status.
Example of successive alarm: a detector belonging to zone 29 goes into alarm status
The total number of alarm events and zones involved will increase, however, the display will still show the
details of the first alarm.
1st line:
unchanged
2nd line:
unchanged
3rd line: number of the zone in alarm status
4th line: total number of alarm events and total number of zones in
alarm status
Example of several alarm event on the same zone: a callpoint connected to the Line I/O
of the zone 29 goes also into alarm status
1st line:
unchanged
2nd line:
unchanged
3rd line: number of the zone in alarm status
4th line: total number of alarm events and total number of zones in
alarm status
To view the alarm event details:
Press the
S
/
T
keys; the details of the first alarm in zone 2 will be shown:
1st line: number of the zone into alarm status
2nd line: description of the zone in alarm status
3rd line: -
4th line: number of the last zone and total zones in alarm status
If no key is pressed within 20 seconds, the display will restore to the original template.
2.6.2
Pre-alarm, Early Warning and Monitor signaling
Signaling is the same for these three event types, however, Monitor signaling is not associated with zones.
Example of first pre-alarm event: a detector belonging to zone 02 goes into alarm status.
1st line: pre-alarm event number and total number of pre-alarms
2nd line: number of the point in pre-alarm status
3rd line: description of the point in pre-alarm status
4th line: -
Alarm Z02
<Zone Descr. 02>
TOT. 001 ON 01 Z
Alarm Z02
<Zone Descr. 02>
Fire alarm Z29
TOT. 002 ON 02 Z
Alarm Z02
<Zone Descr. 02>
Fire alarm Z29
TOT. 003 ON 02 Z
Alarm Z02
<Zone Descr. 02>
Las Z 29 TOT.02Z
Pre-alarm 01/01
Zone 02
<Zone Descr. 02>
