INHECO
05
Doc ID: 900678-001
July 2020
1.3.
Explanation of Abbreviations
The document uses the following terms
°C
Degree Celsius
Hz
Hertz [1/s]
lac
Alternating Current
ldc
Direct Current
K
Kelvin
kg
Kilogram
rhu
relative humidity
TEC
Thermo- Electric- Cooler (Thermoelectric Module)
Uac
Alternating Voltage
Udc
Direct Voltage
W
Watt
ALP
Automated Labware Positioners from Beckman Coulter
IVD
In Vitro Diagnostic
FDA
Food and Drug Administration
MTC
Multi TEC Control controls up to 6 INHECO devices individually
STC
Single TEC Control controls 1 INHECO device
Offset
The difference between the set temperature and actual value once the tempe
-
rature is stable
PT100
PT100 is a Resistive-Temperature-Detector (RTD). This sensor increases its
resistance with increasing temperature.
Set Point
The desired process value programmed into a controller
1.4.
Warranty
The warranty period starts on the date of shipment. Any damage caused by operating
the Heated Lid outside the specifications and guidelines leads to the loss of warranty.
Broken seals on INHECO lead to the loss of warranty as well.
INHECO will only accept parts / devices for return that do not pose a threat to the health
of our staff. In particular, the devices may not have been used in Biosafety Level 3 and 4
environments, or have been exposed to radioactive or radiation materials. →
Decontamination and Cleaning, page 16ff.
Devices exposed to Biosafety level 3 and 4 Environments or radioactive materials are
not accepted by INHECO for return.
1.5.
How to contact INHECO
INHECO GmbH
Address
Fraunhoferstr. 11
82152 Martinsried
Germany
Telephone - Sales
+49 89 899593 120
Telephone - Techhotline
+49 89 899593 120
Fax
+49 89 899593 499
E-Mail - Sales
E-Mail - Technical -Hotline
Website
www.inheco.com
Technical Support & Trouble Shooting Instructions:
http://www.inheco.com/service/technical-support.html