Ingo Maurer TOPOLINO, Инструкция по эксплуатации

Страница: 4 / 8

7 6
English
Caution: Do not connect the lamp to the power supply
until the assembly is completed.
Inserting the bulb
The lamp is supplied with a 20-watt bulb. 5- or 10-watt
bulbs may also be used if a softer light is required.
Important: Do not touch the bulb with your bare hands!
Inser t the bulb (
1
) in the holder (
2
). Ensure that it is
securely in position.
1
Fit the green silicon shade (
3
), pushing it over the holder
until it snaps into place.
2
Assembling the transformer
Inser t the lamp plug (
4
) in the socket (
5
) on the trans-
former (
6
).
3
Caution: Only use the transformer in the position shown
in fig.
3
.
Attaching the clamp
The clamp, fitted with a sucker (
7
), is for surfaces with a
maximum thickness of 40 mm.
4
Adjusting the shade and lamp
The green silicon shade (
3
) is rotatable through 360°.
The lamp is fitted with a ball-joint which makes it tiltable
through 160°. It can also be rotated more or less freely,
but only in the semi-horizontal position shown in fig.
4
.
4 4
4 4
4 4
Changing the bulb
Caution: Unplug the lamp and allow it to cool down
completely. Do not touch the replacement bulb with your
bare hands!
Remove the green silicon shade (
3
).
2
Inser t the replacement bulb (
1
) in the holder (
2
) and
replace the shade, pushing it over the holder until it snaps
into place. Ensure that the shade and bulb are securely in
position.
1
Technical specification
230/125/12 volts, max. 20 watts, halogen, G4 base.
Electromechanical plug-in transformer.
Minimum distance from combustible surfaces:
30 cm
This symbol means that only low-pressure light
bulbs may be used.
Any repairs that may become necessary must be carried
out by a qualified electrician.
English
4 4
4 4
4 4