Inglesina Ally Key, Инструкция по эксплуатации

Страница: 27 / 32

27
devices to be paired, through a sequence of rotation of BLUE LEDs.
Caution! The activation sequence (2 “BEEPs” + GREEN LED) displays
only the first time the device is switched on.
ASSOCIATION OF INGLESINA ALLY KEY WITH INGLESINA ALLY PAD
fig. 4
Within two minutes from the beginning of the search
phase, activate the Inglesina Ally Pad device you want to pair,
pressing it well with an open hand, as shown in the figure.
fig. 5 Making sure that Inglesina Ally Key is still on and in the
search phase (BLUE LED rotating sequence), place the device at the
slot on the Inglesina Ally Pad cushion.
fig. 6 The pairing between the devices occurs when Inglesina
Ally Key emits a single “ BEEP ” and one of the 4 BLUE LEDS becomes
solid, while the others continue rotating.
To pair other Inglesina Ally Pad devices, repeat the operations
described in
fig. 4/5 up to a maximum of 3 devices.
Attention: the solid BLUE LEDs correspond to the associated
Inglesina Ally Pad devices, therefore the maximum possible
number of fixed BLUE LEDs is 3.
Caution! Multiple Ally Keys can be paired to each Inglesina Ally
Pad: carefully check which Ally Key connects first, that is the Ally
Pad in use.
CONFIGURATION COMPLETION
fig. 7
To complete the pairing of Inglesina Ally Key with Inglesina
Ally Pad, shake the device repeatedly until Ally Key emits five ( 5 ) long
“ BEEPs ” accompanied by the lighting of a BLUE LED flashing.
Now Inglesina Ally Key is correctly configured and ready to use.
PAIRING OF INGLESINA ALLY KEY WITH INGLESINA ALLY PAD
fig. 8
When you place your child in a carrycot or car seat equipped
with an Ally Pad previously paired with Ally Key, the device emits three
(
3 ) “ BEEPs ” accompanied by a BLUE flashing LED coming on.
For each paired Ally Pad, Ally Key will emit three ( 3 ) “ BEEPs ” and a
EN