Ingersoll 4018 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 38

Ingersoll 4018 Скачать руководство пользователя страница 5

5

CAUTION:

When using any at-

tachments, never direct discharge
of material toward bystanders nor
allow anyone near the vehicle while
in operation.

CAUTION: Handle gasoline with
care—it is highly flammable.

a. Use approved gasoline container.

b. Never remove the cap of the fuel

tank or add gasoline to a running
or hot engine, or fill the fuel tank
indoors. Wipe up spilled
gasoline.

c. Open doors if the engine is run in

the garage—exhaust fumes are
dangerous. Do not run the
engine (motor) indoors.

CAUTION:

Keep the vehicle and

attachments in good operating
condition, and keep safety devices
in place and in working condition.

CAUTION:

Keep all nuts, bolts

and screws tight to be sure the
equipment is in safe working
condition.

CAUTION: Never store the
equipment with gasoline in the tank
inside a building where fumes may
reach an open flame or spark. Allow
the engine to cool before storing in
any enclosure.

CAUTION: To reduce fire
hazard, keep the engine free of
grass, leaves, or excessive grease.

CAUTION:

The vehicle and at-

tachments should be stopped and
inspected for damage after striking
a foreign object, and the damage
should be repaired before restarting
and operating the equipment.

CAUTION:

Do not change the

engine governor settings or over
speed the engine.

CAUTION: When using the vehicle
with mower, proceed as follows:

(1) Mow only in daylight or in

good artificial light.

(2) Never make a cutting height

adjustment while the engine
(motor) is running if the
operator must dismount to do
so.

(3) Shut the engine (motor) off

when removing the grass
catcher or unclogged chute.

(4)

Check the blade mounting
bolts for proper tightness at
frequent intervals.

CAUTION: Under normal usage,
the grass catcher bag material is
subject to deterioration and wear.
Check bag frequently for deterio-
ration and wear and replace worn
bags. Check that replacement
bags comply with the original
manufacturer’s recommendations
or specifications.

CAUTION: Set parking brake, shut
off engine, remove key and wait
until all engine and attachment
motion has stopped before
dismounting from the operator’s
seat.

CAUTION:

Do not wear loose

clothing, which may catch in
moving parts.

CAUTION: Do not smoke when
working near fuel.

CAUTION: Drive at a speed slow
enough to insure safety and
complete control at all times.

casecoltingersoll.com

«
...
3
4
5
6
7
...
»

Содержание 4018







































Отзывы:

Нет отзывов