background image

 

SAFETY MESSAGES 

 

 

The first twenty-five safety messages which follow are 
provided by the American National Standards Institute 
*(ANSI). Safety rules to supplement those provided by 
ANSI also appear on the following pages. 
 
Study these rules carefully before starting and 
operating your tractor. 

 

Separate Operator’s Manuals are 
provided with the attachments 
purchased with your tractor. Refer 
to the appropriate attachment 
operator

'

s manual for specific 

operating instructions and safety 
messages that apply to the 
attachment. 

 

CAUTION:  Know the controls and 
how to stop quickly. READ THE 
OWNER’S MANUAL and 
instructions furnished with 
attachments. 
 
CAUTION:  Do not allow children 
to operate the vehicle. Do not allow 
adults to operate it without proper 
instruction. 
 
CAUTION: 

Do not carry 

passengers. Do not mow when 
children and others are around. 
 
CAUTION:  Clear the work area of 
objects

 

(wires, rocks etc.), which 

might be picked up and thrown. 
 
CAUTION: Disengage all attach-
ment clutches and shift into 
neutral before attempting to start 
the engine (motor). 
 
CAUTION: Disengage power to 
attachment(s) and stop the engine 
(motor) before leaving the 
operator’s position. 
 
CAUTION: Disengage power to 
attachment(s) and stop the engine 
(motor) before making any repairs 
or adjustments. 
 
 
 

CAUTION: Disengage power to 
attachment(s) when transporting 
or not in use. 
 
CAUTION: Take all possible 
precautions when leaving the 
vehicle unattended, such as 
disengaging the power take-off, 
lowering the attachment(s), 
shifting into neutral, setting the 
parking brake, stopping the 
engine, and removing the key. 
 
CAUTION: Do not stop or start 
suddenly when going uphill or 
downhill. Mow down the face of 
steep slopes; never across or up 
the face. (This ANSI rule modified) 
 
CAUTION: Reduce speed and 
exercise extreme caution on 
slopes and in sharp turns to pre-
vent tipping or loss of control. Be 
especially cautious when 
changing direction on slopes. 

 

 
CAUTION: Stay alert for holes 
rocks and roots in the terrain and 
other hidden hazards. Keep away 
from drop-offs. 
 
CAUTION: Use care when pulling 
loads or using heavy equipment. 
 
a. 

Use only approved drawbar 
hitch points. 

 
b. Limit loads to those you can 

safely control. 

 
c. 

Do not turn sharply. Use care 
when backing. 

 
d. Use counterweights or wheel 

weights when suggested in the 
owner’s manual. 

 
CAUTION: Watch out for traffic 
when crossing or near roadways. 
 
 
 

 

casecoltingersoll.com

Содержание 4018







































Отзывы: