48391130_ed3
EN-2
EN
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears.
Apply grease evenly and sparingly. An excessive accumulation of grease will result in sluggish
operation. See drawing 48380273 and table below. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use.
1
8h
1
8h
1
8h
2
8h
(Dwg. 48380273)
1
2
IR#
IR#
105
67
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.
Environmental Protection
When life of
Ingersoll Rand
electrical product has expired, it must be recycled in accordance
with all applicable standards and regulations (local, state, country, federal, etc.). Improper
disposal may endanger environment.
Symbol Identification
Li-Ion
Return waste material for
recycling.
Do not dispose of this
product with household
waste material.
Product contains Lithium-Ion.
Do not dispose of this product
with household waste material.
Original instructions are in English. Other languages are a translation of the original instructions.
