30
18-GJ82D1-1F-EN
3.
Remove the control board from the control pocket by sliding the
control pocket mounting plate out until the first stop is reached.
4.
Install the low voltage wire harness.
Important:
The low voltage wire harness is shipped in the supplied
document pack.
For Horizontal Right Installations Only
5.
Remove the control board completely from the control pocket.
Rotate the control board 180 degrees. Place the control board 2–3
inches back into the control pocket.
6.
Make connections per hookup diagrams.
Important:
After wires have been connected or service performed,
the control board MUST be rotated back to the original
orientation before inserting into cabinet control pocket.
