Ingersoll-Rand Schlage ND Series, Руководство по обслуживанию

Страница: 96 / 110

ND-Series Service Manual
91
Standard Installation Instructions
Check Lock Function
Test lock. If a keyed function is not working properly, check the LOCK TIMING section.
9
Install Strike
Install strike and secure with two (2) screws.
8
10-025 Strike
Strike Screw
For Keyed Functions
a. Insert key into cylinder. Rotate key 90° and hold (rotation direction depends on function).
b. Push pin wrench into hole and pull lever off.
c. Rotate key 180°.
d. Slide lever onto spindle until it clicks into place.
Lock Timing
c
180°
d a
90°
b
A. Adjust Button
a. To remove button, squeeze prongs together.
b. Attach button using appropriate hole as shown.
B. Adjust Chassis
a. For 1
³⁄₈
" (35mm) door: Follow step c. Use optional 1
³⁄₈
" (35mm) door spacers.
b. For
1⁵⁄₈
" (41mm) door: Rotate adjustment plate clockwise until tight against chassis. Then rotate counterclockwise
¹⁄₂
turn.
c. For
1³⁄₄
" (44mm) door: Rotate adjustment plate until aligned with
1³⁄₄
" mark. FOR ND85: Rotate counterclockwise
¹⁄₂
turn.
d. For 2" (51mm) door: Rotate adjustment plate until aligned with 2" mark.
Door Thickness Adjustment
Prongs
1³⁄₄
" (44mm)
2
" (51mm)
1⁵⁄₈
" (41mm)
2" (51mm)
1³⁄₄
" (44mm)
Adjustment Plate
Chassis
Front Back
Rotate from front