Ingersoll-Rand Schlage L Series, Руководство по обслуживанию, Страница: 124 / 148

L-Series Service Manual
118
Door Handing
The hand of a door refers to the position of the lock
relative to the side and direction of the door hinge.
There are four possible ‘handings’ based on whether
the hinge is on the right or left side of the door and
whether it swings to the inside or outside
(see diagram).
LH
Left Hand
LRB
Left Hand
Reverse Bevel
RH
Left Hand
RRB
Right Hand
Reverse Bevel
INSIDE
INSIDE
OUTSIDE
OUTSIDE
Changing the Lock Hand
There are two steps to changing the hand of any
L-Series lock:
1. Pull and Rotate Latchbolt. With the lock case
removed from the door, pull the latchbolt away from
the lockcase and rotate 180°.
2. Change Lock Handing Screw. Remove the lock
handing screw from one side of the chassis and
install it on the opposite side. The lock handing screw
should always be on the interior side of the door for
L-Series locks, and on the exterior side of the door
for LV-Series locks.
180˚
Pull
Handing
Screw
Changing Cylinder Turn Hand
1. Remove cam.
2. Move ball and spring to appropriate hole.
Ball and Spring
Hole for
right-handed
Hole for
left-handed
Hole for
non-handed