Ingersoll-Rand Schlage L Series, Руководство по обслуживанию, Страница: 120 / 148

L-Series Service Manual
114
Special Options
Solid Latchbolt Armor Front with
Deadbolt Hole L9000 Lead Lining
XL11-515 L400 Lead Lining
XL12-216
XL11-422 XL11-743 XL11-515 XL12-216
.125 ± .015
.125 ± .015
For use with electric strikes.
The anti-friction tongue is
replaced by a nylon insert to
prevent interference with the
strike gate. For use with dummy functions or
inactive doors. Specify dummy
function per XL11-743. Lead plate installed on case cover. Buyer should verify that the
preparation meets local installation requirements or regulations.
Specify door hand.
Anti-Ligature Knob Trim Anti-Ligature Thumbturn Anti-Ligature Conversion Kits
XL11-000 09-029 Part Number Functions
09-155
L9010, L9176, L9070,
L9076, L9080, L9080EL,
L9080EU, L9465, L9060,
L9071, L9077, L9082,
L9082EL, L9082EU,
L9482, L9457, L9466
09-156
L9412, L9050, L9056,
L9453, L9456, L9473,
L9480, L9485,
L9460 with pull
09-157 L9464, L464, L9462, L462
09-158 L480, L9460, L460
09-159 L9040, L9440
Specify SK1 trim per XL11-000. NOTES: 1) For knob only.
2) For 1
³⁄₄
" doors.
3) Available in 630 fi nish only. (For
conversion from non-630 fi nish,
order armor front, strike and
cylinder separately.)
Special Cylinder Applications
“X” Number Description
XB03-418
Extended mortise cylinder (20-001, 30-001 or 30-004), 1
⁷⁄₈
’’–5’’ long, Classic or Everest®
XB11-475*
Full size IC extended mortise cylinder (26-091 or 30-008), 2
¹⁄₄
’’–5’’ long, Classic or Everest®
Primus® full size IC extended mortise cylinder (20-763 or 20-798), 2
¹⁄₄
’’–5’’ long
Full size IC mortise cylinder housing less core (20-059 or 30-007) 2
¹⁄₄
’’–5’’ long
XB11-638
Primus® mortise cylinder (20-700, 20-787, or 20-789), 1
⁷⁄₈
’’–5’’ long
* Available in
¹⁄₄
” increments. Order collars or blocking rings separately to fi ll gaps.
NOTES: 1) Specify complete cylinder as required, then “X” number (e.g. 20-001-118-P per XB11-475).
2) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus
®
cylinders are required less key blanks.
3) Specify fi nish and dim code.