background image

Programming the HandPunch

34

Management Menu

The Management menu commands allow you to manage employee data stored in a 
HandPunch unit. The following section provides a brief summary of the employee data 
that may be manipulated on a HandPunch unit.

Enter the appropriate password to enter the Setup command menu. Once you have 
entered the command menu, there are three options available for navigating the 
command menu system.

• 

Press 

#

 to enter the command shown on the display.

• 

Press 

*

 to step to the next command in the menu.

• 

Press 

CLEAR

 to exit the command menu (pressing any numeric key also exits the 

command menu). If you are in a command’s sub-menu, press 

CLEAR

 multiple times to 

completely exit the command menu.

There are four commands available from the Management command menu.

• 

List Users

• 

Set User Data

Refer to Table 7 and identify the command you need to perform. Step through all previous 
commands until you reach the desired command.

Table 7: Setup Command Menu

Setup Menu

Password = 3

List Users
         Display
         Print
Set User Data
         User Reject

Navigating 
the Setup 
Command 
Menu

Management 
Commands

Содержание SCHLAGE HP-2000































































Отзывы: