Ingersoll-Rand RS11i, Информация по техническому обслуживанию продукции

Страница: 14 / 108

EN
EN-14 47629519 Rev. C
FAULT CAUSE REMEDY
low sump pressure.
system leak. located and repair.
Minimum pressure check valve
faulty.
Repair with service kit.
Blowdown valve faulty. Repair with service kit.
loss of control power.
Check 110v circuit breaker.
Check wiring.
Check contactor kM1.
Check motor rotation. drive system fault. Contact your local Ingersoll Rand representative.
vsd communication failure.
Communication wiring faulty. Check and replace if required.
drive faulty. Contact your local Ingersoll Rand representative.
Controller faulty. Contact your local Ingersoll Rand representative.
vsd initialization fault.
Communication wiring faulty. Check and replace if required.
drive faulty. Contact your local Ingersoll Rand representative.
Controller faulty. Contact your local Ingersoll Rand representative.
Change separator element
and/or high sump pressure.
faulty pressure transducer
measurement.
Calibrate and validate the wet sump and package
discharge transducers (for Rs15-22n, Rs15-22ie/ne).
Moisture separator condensate
drain trap faulty.
Ensure condensate drain system is functioning properly,
and condensate is being drained.
separator element dirty or
blocked.
Change separator element.
Machine stops but no alarm
message.
loss of outputs of control power. Check controller outputs (110v aC) power supply (fuses/
mini circuit breaker).
Motor current fault.
loss of control power.
sump pressure too high.
faulty motor or airend. Check control power circuit and breaker.
Check separator element pressure drop.
Contact your local Ingersoll Rand representative.
Ct failure
fault Ct, wiring or loss of control
power.
Check wiring and control power circuit.
RELEASED 23/May/2019 07:27:22 GMT