4
DO NOT REMOVE, REPAIR, OR REPLACE ANY ITEM ON THIS DRYER WHILE IT IS PRESSURIZED.
HANDLING THE DRYER
SECTION 1
1.1 HANDLING INSTRUCTIONS
Lift the dryer by the skid (see fork lift access in SECTION 3) or the
lifting lugs on the dryer vessels.
If the unit is to be lifted by an overhead device, attach the lifting
chains or cables to the vessel lifting lugs. Make sure that the chains
or cables are clear of all piping and dryer components.
DO NOT LIFT THE DRYER BY PIPING OR CONTROL BOX.
THESE COMPONENTS ARE NOT DESIGNED TO HOLD
THE WEIGHT OF THE DRYER. PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE MAY RESULT.
WARNING
1.2 STORAGE INSTRUCTIONS
The unit should be stored indoors and covered with a tarpaulin to
keep it clean. The location should be free from corrosive gasses
and extreme humidity, which will cause damage to the unit.
If outside storage is required, the unit MUST BE adequately
covered to prevent rain or snow from accumulating on the
dryer. The unit must be placed on a paved surface to keep it out
of standing water and mud.
1.3 EQUIPMENT CHECK
Inspect the dryer for any damage that may have occurred during
shipment. Inspect all fittings, piping connections, fasteners, etc. for
loose connections. Also check gauges and lights for cracks or
breakage.
IF DRYER HAS BEEN DAMAGED DURING SHIPMENT:
(1) NOTIFY CARRIER IMMEDIATELY AND FILE A CLAIM.
(2) CONSULT FACTORY BEFORE OPERATING THE
DRYER.
