Ingersoll-Rand R Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 77

29
CAUTION!
The Factory Default will change all process values and set points back to their original factory settings.
PROCEED WITH CAUTION...
E7 RESET SETTINGS
TO FACTORY DEFAULTS
PROCEED WITH CAUTION
Press SET to select
______________________________________________________________________________________________________
NULL STATE - When the Null State is selected, all operations will cease. The dryer display will go
to one of the three possible initialization screens as shown in section 1.0 (see STARTUP NULL
SCREEN).
CAUTION!
The ‘Reset Unit to Null State’ will immediately stop all operations and display the initializations screen.
PROCEED WITH CAUTION........
E6 RESET UNIT
TO NULL STATE
PROCEED WITH CAUTION
Press SET to select
There is a Diagnostics Screen that shows general information that will be useful if service is ever necessary
to the Control Center panel (NOTE: a ‘.1’ indicates NEVER happened.)
E8 DAY/OPER: 365
Total Resets: 12
Stack Mem: -1
Last Reset: X00X00X00
CALIBRATlON MENU . Each of the transducers in the system have their ranges set in the ‘H’ series
screens. It is important that the value indicated in the screens match the maximum range of the
transducer span. If while servicing the dryer, and a different ranged transducer is replacing a factory
installed transducer, make certain a corrected value for maximum range is entered in the appropri-
ate screen.
E5 CALIBRATION
MENU
Press SET to select
HI Inlet Pressure
Value: 100 psi
Offset: 0 psi
Scale: 200 psi