Page 6 of 8
PE10P-X-X-A0S (en)
PARTS LIST / PE10P-X-X-A0S AIR MOTOR SECTION
Indicates parts included in 637412 Air Section Service Kit shown below and items (70), (144), (175) and (180) shown on page 4.
AIR MOTOR SECTION SERVICE
GENERAL REASSEMBLY NOTES:
y
Air motor section service is continued from fluid section
repair.
y
Inspect and replace old parts with new parts as neces-
sary. Look for deep scratches on metallic surfaces, and
nicks or cuts in “O” rings.
y
Take precautions to prevent cutting “O” rings upon instal-
lation.
y
Lubricate “O” rings with Lubriplate FML-2 grease.
y
Do not over-tighten fasteners, refer to torque specifica-
tion block on view.
y
Re-torque fasteners following re-start.
AIR MOTOR SECTION DISASSEMBLY
1. Remove (160) air manifold, exposing (132 and 166) gas-
kets and (176) checks.
2. Remove (121) plugs.
AIR MOTOR SECTION REASSEMBLY
1. Clean and lubricate parts not being replaced from service
kit.
2. Replace (173) “O” rings and assemble (121) plugs.
3. Assemble (132 and 166) gaskets and (176) checks to (101)
body.
4. Assemble (160) air manifold to (101) body, securing with
(134) screws.
NOTE:
Tighten (134) screws to 35 - 40 in. lbs
(4.0 - 4.5 Nm).
AIR MOTOR PARTS LIST
Item Description
(size)
(Qty) Part No.
[Mtl]
Item Description
(size)
(Qty) Part No.
[Mtl]
101 Center Body
(1) 95970
[P]
103 Bushing
(1) 96000
[D]
121 Plug
(2) 96323
[D]
132 Gasket
(1) 96170
[B]
133 Washer
(M6)
(6) 95931
[SS]
134 Screw
(M6 x 1 - 6g x 25 mm)
(6) 96340
[SS]
160 Air Manifold
(1) 96325
[A]
166 Gasket
(1) 96171
[B]
173 “O” Ring
(3/32” x 1-3/8” OD)
(2) Y325-123
[B]
176 Diaphragm
(check valve)
(2) 95845
[U]
181 RollPin
(5/32”OD x 1/2”long)
(4) Y178-52-S [SS]
201 Muffler
(1) 93139
[P]
Lubriplate FML-2 Grease
(1) 94276
Lubriplate Grease Packets(10)
637308
Fluid section service kit, see page 4.
MATERIAL CODE
[A] = Aluminum
[D] = Acetal
[SS] = Stainless Steel
[B] = Nitrile
[P] = Polypropylene [U] = Polyurethane
