Ingersoll-Rand LT6K, Руководство по эксплуатации и обслуживанию, Страница: 18 / 37

Operating Instructions
l23201387 (03/05) 17 Lightsource LT6K
Operation and Maintenance Manual
Towing
Note: When towing unit in the United Kingdom,
attach fog lamp on bumper to the right of
center. Secure transport warning sign to
right end of lamp crossbar.
Note: When towing in Continental Europe and
other locations, attach fog lamp on bumper
to the left of center. Secure transport
warning sign to left end of lamp crossbar.
Connecting the machine to the vehicle.
1. Rotate lamps to transport position and secure by
fitting strap around the lamp bodies.
2. Make sure that the tow vehicle hitch is the proper
size to securely connect to the eye or coupler on
the unit.
3. Check eye or coupler bolts for any looseness or
wear. Tighten or replace as required.
4. Chock wheels.
5. Position tow vehicle to align hitch with eye or
coupler.
6. Stand aside while operating the jack to seat eye or
coupler onto the hitch.
7. Secure the hitch.
8. Attaching the brake actuator breakaway chain /
cable (if supplied).
9. Connect lighting plug.
10. Remove wheel chocks.
11. Test brakes (if supplied).
Disconnecting the machine from the vehicle.
1. Chock wheels.
2. Stand aside while disconnecting brake actuator
breakaway chain/cable, if supplied.
3. Disconnect lighting plug.
4. Release hitch.
5. Operate the jack to raise eye or coupler from hitch.
6. Move the tow vehicle.
7. Level the machine.
Lifting the machine
Figure 6
Before lifting the machine, carry out the following
checks:
1. The tower hold-down pin is fully inserted through
both sides of the tower rest and the lock pin
[Figure
6] is installed.
2. No loose objects are stored inside or on top of the
machine.
3. No additional equipment is hung onto or under the
machine.
4. Any device used for lifting is rated at a minimum of
2 Ton.
5. No personnel should be on or under the machine at
any time during lifting.
WARNING
Make sure that the tow vehicle has towing
capacity for weight of this unit as stated in
“Specifications Lightsource LT6K” on page 33
WARNING
Make certain hitch is completely engaged to tow
vehicle and is secure. Failure to do so could
result in serious personal injury.
Do not use eye or coupler with any bent or
otherwise damaged parts.
SCREW
PIN