Ingersoll-Rand IRN100-200H-2S Скачать руководство пользователя страница 78

Страница: 78 / 102

IRN37 - 160K - CC & IRN50 - 200H -CC & IRN75 - 160K - 2S & IRN100 - 200H - 2S & R190-225NE

ingersollrandproducts.com

9.0 OPERATING INSTRUCTIONS

Scheduled start

This option will cause the unit to start on the scheduled

start day , at the time stored in this setpoint. To disable

this option, set the value of scheduled start equal to the

value of scheduled stop.

Scheduled stop day

This option is the selection for the day that a scheduled

stop will take place. The selections are Sunday, Monday,

Tuesday, Wednesday, Thursday, Friday, Saturday, Daily (Su

- Sa), Weekdays (M - F), or Weekends. This option setpoint

will work with the scheduled stop setpoint.

Scheduled stop

This option will cause the unit to stop on the scheduled

stop day, at the time stored in this setpoint. To disable this

option, set the value of scheduled stop equal to the value

of scheduled start.

Modbus protocol and address

See the Modbus manual.

9.8 SENSOR CALIBRATION

Pressure sensor calibration is done through the SENSOR

CALIBRATION screen. Sensor calibration can only take

place when the machine is stopped. Calibration needs

to be done only after a sensor has been replaced or the

Intellisys controller has been replaced.

−SENSOR CALIBRATION−

100

PSI

100

PSI

SENSOR 4APT

CALIBRATE

READY TO START

SENSOR 3APT

CALIBRATE

STATUS

MAIN MENU

SELECT

Each of the sensors listed below can be chosen by using

the up and down arrow buttons to highlight it on the

screen.

SENSOR CALIBRATION Items

Sensor 4APT (Package Discharge)

Sensor 3APT (Wet Side Sump)

Sensor 6APT (Dry Side Sump)

Sensor 2APT (Interstage)

Select the highlighted sensor by pressing the SELECT

button. Press the CALIBRATE button to start the automatic

calibration procedure, or press the CANCEL button to not

calibrate it and return to the sensor list.
The calibration screen can be exited by pressing either

the STATUS or MAIN MENU buttons. If no buttons are

pressed within 30 seconds, the display will return to the

CURRENT STATUS screen.

111213.14.59

Содержание IRN100-200H-2S







































































































Результаты поиска

Содержание IRN100-200H-2S

Отзывы:

Похожие инструкции для IRN100-200H-2S

Бренды по названию

Популярные бренды

Ingersoll-Rand IRN100-200H-2S, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание IRN100-200H-2S

Отзывы:

Похожие инструкции для IRN100-200H-2S

Бренды по названию

Популярные бренды