Ingersoll-Rand HP825WCU, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 31 / 434

Book 35393560 (12/02)
31
( )
Automatic Shutdown/Diagnostics
Should any of these problem situations occur, the unit
will automatically shutdown and stop.
BEFORE
restarting the unit or flipping the POWER switch to
“Off”, check the DIAGNOSTICS area on the
instrument panel.
In a shutdown situation, the function of the panel
lamps is to indicate what specific failure caused the
unit to shut down. These lamps will remain illuminated
until the Power Switch is turned “OFF”.
Note: None of the panel lamps should be glowing
when machine is operating. If they are, shut unit down
and investigate.
The upper four (4) lamps are electronically “latched”
to only respond to the first or primary signal for a
shutdown. In other words, if the automatic shutdown
is the result of one of these four problems, only that
particular problem lamp will be lit. And the lamp will
remain lit as long as the batteries provide power.
Refer to OPERATING CONTROLS AND
INSTRUMENTS for the various problem signal
criteria (
°
F, psi, etc.). The indicated problem area
should be inspected for a physical cause (low fluid,
broken fan belt, evidence of excessive heat, etc.) and
corrections made.
Sensors (1) through (5) will automatically reset when
the problem condition is corrected.
Other possible causes for an unexpected shutdown
are listed on the Trouble Shooting Chart.