Ingersoll-Rand HP375AWIR Скачать руководство пользователя страница 12

Страница: 12 / 82

P425AWIR (7/120), XP375AWIR (9/110),
HP375AWIR (10/105), VHP300AWIR (14/85)

WARNING – Flammable liquid.

WARNING – Before connecting the tow

bar or commencing to tow consult the

operation and maintenance manual.

WARNING – For operating temperature

below 0

C, consult the operation and

maintenance manual.

WARNING – Do not undertake any

maintenance on this machine until the

electrical supply is disconnected and

the air pressure is totally relieved.

WARNING – Consult the operation and

maintenance manual before

commencing any maintenance.

Do not breathe the compressed air from

this machine.

Do not remove the Operating and

Maintenance manual and manual holder

from this machine.

Do not stack.

Do not operate the machine without the

guard being fitted.

Содержание HP375AWIR



















































































Результаты поиска

Содержание HP375AWIR

Отзывы:

Бренды по названию

Популярные бренды

Ingersoll-Rand HP375AWIR, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Результаты поиска

Содержание HP375AWIR

Отзывы:

Бренды по названию

Популярные бренды