Ingersoll-Rand FA2.5A Series, Инструкция по эксплуатации, техническому обслуживанию и ремонту

Страница: 7 / 73

6 MHD56114 - Edition 4
SPECIFICATIONS
Model Code Explanation: (Example FA2.5A-LXK1G) FA 2.5 A - L X K 1 G
Series
FA = Force 5 Air Powered
Capacity: (Based on wire rope at mid drum)
2.5 = (2-1/2 tons (5,000 lbs [2,273 kg])
Generation:
A = Third Generation
Drum Length: (Refer to drum length chart)
S = Short (7 inches [178 mm])
S = Medium (13-1/2 inches [343 mm])
L = Long (20 inches [508 mm])
R = Extra Long (24 inches [610 mm])
Drum Brake:
A = Automatic Drum Brake (increases the overall winch length 2.75 inches (70 mm))
M = Manual Drum Brake (increases the overall winch length 2.75 inches (70 mm))
X = None
Disc Brake:
K = Automatic Disc Brake (Standard)
X = None
Control:
1 = Winch mounted lever throttle (Standard)
** 2XX = Remote full flow lever throttle (maximum 20 ft/6 m)
** 3XX = Remote pilot pendant throttle (standard = 6 ft/1.8 m; maximum 66 ft/20 m)
** 4XX = Remote pilot lever throttle (maximum 66 ft/20 m)
5XX = Remote electric over air throttle †
Options:
7 = Drum grooving (Number = wire rope size in sixteenths, e.g. 7/16 inch) †
C = Low Temperature Components; specify -10° C (14° F) or -20° C (-4° F)
D = Drum divider flange and additional wire rope anchor †
E = Construction Cage †
F = Free spool clutch (available only with manual drum brake)
G = Drum Guard
H = Open Front frame for horizontal pulling
*** M1 = Material Traceability (typical material results) ††
*** M2 = Material Traceability (actual material results) ††
*** M3 = Material Traceability (actual material results for these parts in finished, as-delivered condition) ††
N = Type Approval - Specify: • American Bureau of Shipping (ABS)
• Det Norske Veritas (DNV) • Lloyd’s Register of Shipping (LRS)
P = Marine 812 Finish
Q = Special Paint
T = Tensioning Manifold
U = Underwound*†
V = Press Roller
Z = Sandblast and Carbozinc primer only
-E = Compliance with European Community Machinery Directive: • Muffler • Overload Device
• Main air supply emergency shut off • Drum Guard • CE Documentation
Notes: *
**
***
†
††
Available only with auto disc brake.
Remote throttles are provided with 6 feet (1.8 metres) of hose. Specify hose lengths greater than 6 feet (1.8 metres).
Contact your
Ingersoll-Rand distributor or the factory for control acceptability for hose lengths greater than 60 feet
(18.3 metres). Metric lengths are provided for reference only, order lengths in feet.
Documentation, witness testing and material traceability available; must be requested at time of order. Specify options or
contact the factory or your nearest
Ingersoll-Rand distributor for information.
Not covered in this manual.
Refer to ‘Traceability’ on page 8 for a description of the differences between M1, M2 and M3.