41
7.0 PARTS LIST
7.1 INTRODUCTION
GENERAL
This manual, which contains an
illustrated parts breakdown, has
been prepared as an aid in identify-
ing and ordering parts for the ESP
compressor. All of the compressor
parts, listed in the parts breakdown,
are manufactured with the same
precision as the original equipment.
Ingersoll-Rand Company service
facilities and parts are available
worldwide. There are Ingersoll-
Rand Company Branch Offices and
authorized distributors located in
the principle cities of the United
States. In Canada, our customers
are serviced by the Canadian
Ingersoll-Rand Company, Limited.
There are also Ingersoll-Rand
Company subsidiaries and autho-
rized distributors located in the
principle cities throughout the
world.
DESCRIPTION
The illustrated parts breakdown
illustrates the various assemblies,
sub-assemblies and detailed parts
which make up this particular
ESP compressor. A series of illus-
trations show each part clearly and
in it’s correct location relative to the
other parts in the illustration. Each
part of an illustration is referenced
with a number. The number,
description and quantity needed
per assembly are listed in numeri-
cal order on the following pages.
Items with a description of NSS are
not sold separately and must be
purchased as an assembly. Items
with a description of Ref. indicate
that the item is located elsewhere
in the parts list.
HOW TO USE THIS
PARTS MANUAL
1. Turn to the Parts Section to
locate desired illustrations.
2. Locate the part on the illustration
by visual identification and the ref-
erence number.
3. Find the reference number on
the Tabulated page, along with the
Part Number and Description.
SERIAL NUMBER BREAK
When a part is changed and it
doesn’t supersede the previous
part, this change must be docu-
mented by a serial number break.
By using the last six (6) digits of
the serial number, as outlined
below, this change is recorded in
the parts list.
U95102 indicates part is used
on units up to and including serial
number ending in U95102.
U95103 indicates part is used
on units with serial number ending
in U95103 or higher.
HOW TO ORDER PARTS
In order that all avoidable errors be
eliminated when ordering parts,
please specify the following:
1. The model number of the unit as
shown on the Compressor Data
Plate.
2. The serial number of the unit as
shown on the Compressor Data
Plate.
3. The form number of this manual.
4. The reference number, part num-
ber, description and quantity need-
ed exactly as listed.
5. The motor data code shown on
the motor data plate.
AN0000
U
95
102
MANUFACTURED IN U.S.
YEAR OF MANUFACTURE
JULIAN DATE OF MANUFACTURE
Содержание EP 20-ESP
