Ingersoll-Rand EMS-3000 Series, Руководство пользователя

Страница: 29 / 40

21
3
Maintenance
Maintenance Overview
The Ingersoll Rand EMS-3000 Series System product line is manufactured to the highest standards using the
highest quality parts, components, and technology. Due to the industrial nature of the environments in which the
EMS-Series 3000 Systems are often installed, a well-defined maintenance schedule will ensure many years of
continuous operation. While most maintenance tasks must be performed only by an Ingersoll Rand EMS Certified
Technician, filter replacements are to be handled by the customer. The equipment is designed for continuous
operation. Listed below are some precautions, notes and recommendations regarding the maintenance of EMS-
3000 Series Systems:

Wear appropriate Personal Protection Equipment (PPE) at all times.

Maintenance and replacement of parts and components must be performed promptly and in a
timely manner as described in the Maintenance Schedule listed in this chapter.

The scheduled maintenance and/or replacement of parts must be performed by Ingersoll Rand
EMS Certified Technicians. The appropriate parts must be used in the replacement process and
the scheduled recommended equipment maintenance schedules must be followed.

It is recommended that all personnel responsible for the operation of the EMS-3000 Series System
be trained on the operation and maintenance requirements of the equipment.

Some of the components of the EMS-3000 Series System operate with HIGH VOLTAGE .
Therefore the operation of the EMS-3000 Series System by unauthorized personnel will
significantly increase the risk of accidents. Please contact the Ingersoll Rand EMS service
department should any assistance and or extra training be needed.

The EMS-3000 Series System must be kept clean at all times. As with all electrical equipment,
avoid excessive contact with water and excessive humidity at all times. Short circuits may occur if
the equipment comes in direct contact with liquids while it is in operation.

Filter replacements can be performed by the customer.

The customer should also periodically wipe the EMS-3000 Series System with a damp cloth and
mild detergent like Simple Green. Abrasives or solvents should not be used.

Please contact an Ingersoll Rand EMS Certified Technician should you need any assistance.