Ingersoll-Rand BU7A, Информация по техническому обслуживанию продукции

Страница: 4 / 12

INSPECTION REPORT
Ingersoll Rand BU7A Air Winch
Model Number: Date:
Serial Number: Inspected by:
Reason for Inspection: (Check Applicable Box)
1. Scheduled Periodic Inspection:
(_____ Months _____ Years)
Operating Environment:
2. Discrepancy(s) noted during Frequent Inspection
Normal ____ Heavy____ Severe ____ 3. Discrepancy(s) noted during maintenance
4. Other: ___________________________
Refer to the Product Information Manual and Product Parts Information Manual and “INSPECTION” section for general inspection criteria. Also, refer to appropriate National
Standards and Codes of practice. If in doubt about an existing condition, contact the nearest Ingersoll Rand Distributor or the factory for technical assistance.
COMPONENT
CONDITION CORRECTIVE ACTION
NOTES
Pass Fail Repair Replace
Case, Frame and Motor Housing
Drum Band Brake (125% Load Test)
Drum Band Brake (Visual Inspection)
Motor
Controls
Air System
Fasteners
Reduction Gears
Labels and Tags ---
Shafts
Winch Guard
Emergency Stop Valve
Wire Rope ---
Other Components (list in NOTES
section)
TESTING Pass Fail NOTES
Operational (No Load)
Operational (10% Load)
Operational (Maximum Test Load*)
* Maximum test load is 125% of rated line pull. Testing to more than 125% of rated load may be required to comply with standards and regulations set forth in areas
outside the USA.
This form may be photo copied and used as an inspection record.
4 Form MHD56461 Edition 2